Bushmaster 2000

Reverse-engineered board schematic (courtesy of Timberwolf)

vertical feed threads are supposedly 13/16"-30

talked to Jerry Dobbins himself on 23APR2002 - he said the vert feed threads are .812-32.

LCD info:

MaNiAc states:

So far the LCD seems to respond well to Samsung KS0032(S6A0032) controller commands.

LCD Flex cable end connections to the LCD controller:
1)N/C
2)N/C
3)N/C
4)GND(Vss)
5)+5 (Vdd)
6)Contrast (V0)
7)RS
8)E_RD
9)DB4
10)DB5
11)DB6
12)DB7
13)N/C
14)N/C


...and defiance adds:
Two notes. 1, be certain you set the DIP enable high when interfacing to the LCD, 2, the first (function set) command must be sent as if the controller is in 8-bit mode. Other than that, the controller is completely HD44780 compatible, wired for 4-bit mode.

CAD Files

me262 created this file in MasterCAM 8: bushy_body.MC8
which Jim Eaton (of Ripper milling fame) translated into IGES and DWG formats.