Palmer Stroker/Typhoon  (info from Chris Mader)



The Typhoon/Stroker ram is a Humphrey model 8-D
1" stroke
7/16-20 threaded nose
10-32 threaded rod
10-32 threaded ports
the end is milled with a 3/8" wrench flat

Sheridan/Stroker bolt o-rings are:
ID: 7/16"
OD: 5/8"
width: 3/32"
AS568A Dash Number: 111

Typhoon/Houndstooth bolt o-rings are:
ID: 1/2"
OD: 11/16"
width: 3/32"
AS568A Dash Number: 112

Typhoons use a Sheridan valve tool for valve removal.

Blazer barrel specs:
The 'threaded' section has an OD of .795"
The 'threaded' section for serial numbers BZ2000+ is 2.03" long
The 'threaded' section for serial numbers BZ1000 and under is 2.30" long

Blazer grip frame hole spacing is the same as AutoMags, Sheridans, and AutoCockers - 4.125"