From nerobro:
Spyder and M3 electroframes both pull the sear for 6ms.

The solinoid is 1" diameter, and is 1ohm resistance.  I'll grab the part off
of solinoid city tonight. 

The Metal Spyder e-frames are easily retapped for 10/32 x 3/4" bottomline
screws.

From camaro305rs:
Stock striker weight - 2.3oz (measured at the
postoffice)

Lower tube diameter - .685"
Upper tube diameter - .703"
      im not sure how tight Kingman's specs are but
      these are close.

Grip frame hole spaceing - 5.1875" ctc

bottom line screw spacing - .75" ctc & .125" wide ctc

stock valve lenght - a little over .625" long